Induchem offer a wide range of ball valves for many applications across Chemical, Pharmaceutical, Oil & Gas, Food & Beverage, Bio Tech and General Industries, and carry and supply a complete range of gates, globes and check valves in a wide range of materials, connections and pressure classes. Our expert staff will help you to choose the best valve for your particular application. Induchem are proud distributors for globally established brands such as SVF, Bray, Kitz, Flowtek, Steriflow, Crane, Xomox and Nibco to name just a few.

Ball valves

• Size Range: ½" to 24", Pressure Classes 150 to 2500 lb
• Full and Reduced Bore, 2 Way and Multiport designs; Floating Ball, Double Block & Bleed and Trunnion mounted
• Industrial and Sanitary design options; fire tested and certified
• Design Standards: ISO 17292/API/ASME B16.34/BS5351
• Materials: Bronze, Carbon, Stainless Steel, Hastelloy, AL6XN and other exotics
• Lever or gear operated, pneumatic actuators available

Butterfly valves

Rubber-lined, High Performance, Double Offset and Triple Offset to meet all industry requirements.

• Size Range: 50mm to 1200mm; Wafer, Semi, Fully lugged and Double Flanged design
• Resilient and Metal seated
• Materials include: Cast Iron/Ductile Iron, AluBronze, Carbon, Stainless Steel and exotic materials

Gates, globes and check valves

• Cast & Forged; Pressure Classes from 150 lb to 2500 lb
• Gate: Solid wedge, Flexible wedge and Parallel Slide. Globe: Plug and Bellows type. Check: Horizontal lift, Swing and Wafer Check
• Materials include: Cast Iron/Ductile Iron, AluBronze, Carbon, Stainless Steel; end connections Welded, Threaded and Flanged

Knife gate valves

Very thin profile, supplied in either wafer or lugged body, with seats available in a variety of materials. Suitable for many applications and industries including pulp/paper and mining.

Sleeved plug valves

XOMOX Sleeved plug valves are non-lubricated quarter-turn valves that achieve sealing through the use of a compressible sleeve as a sealing member. The Easi-Sleeve single module design suits remote or semi-remote applications such as nuclear fuel reprocessing and vitrification plants.

• Sizes 1/2" through 24"; ANSI 150 through 600 and DIN PN10 through PN100; flanged, screwed and welded ends
• Carbon, stainless steel and special alloys; sleeve materials PTFE, RPTFE, T-475, T-600, PFA, Xomox 7 and UHMWPE; multi-port configurations

Industrial diaphragm valves

Lined weir-type diaphragm valves for corrosive, erosive or solids-laden media in the chemical processing, mining, power generation, pulp and paper, and water treatment industries. Used effectively as a control valve or where manual throttling of a fluid is desired.

Control valves

Cage control trims for severe and arduous service, special cage guided trims on lined plug valves for modulating flows of aggressive slurries, and cage, globe, plug, sliding gate, butterfly, ball, diaphragm and hygienic variants. A huge variety of top-works and positioners suitable for installation in all environments; all major communication platforms are supported.

• Characterised 'V' Ball with 60 degree and 30 degree V port provides equal percentage flow control
• Materials of Construction include: Carbon, Stainless Steel & Exotic Materials; Size Range 15-305 mm
• Control valve health check: a Predictive Maintenance plan on your valve assets with up to 16 non-intrusive performance tests, positioner calibration, loop check with control room, calibration certificate and valve history stored on the ISO 9001 Induchem Asset Management System (IAMS)

Pressure independent control valves

Induchem are the exclusive distributor for Flow Control's Delta P Pressure Independent Control Valves, which instantaneously compensate for system pressure fluctuations, maintaining a stable flow at all valve positions.

• 10 Year Warranty; factory commissioned with inlet, intermediate & outlet P/T ports; no additional balancing valves required; 100:1 turndown
• Size Range: 15mm to 450mm; Bronze & Cast Iron body with threaded or flanged connections

Regulators and balancing valves

Pressure reducing regulators from 0.2 to 16 bar and flows of up to 16,000 l/min, in relieving, non-relieving, internal flow-check and manifold models (ASCO). Jordan Valve Back Pressure Regulators in Sliding Gate & Globe Trim, Self-Sensing and Pilot-Operated.

• Sizes 1/4" to 6"; welded, threaded and flanged connections; pressure class ANSI 150/300, PN16, PN40
• Balancing valves (Circuit Setters) from Bell & Gossett, ARI & Vexve, in ANSI and DIN; Vexve also available in Stainless Steel

Powder handling valves

High performance ball segment powder handling valves for the most demanding applications in general, chemical, pharmaceutical and solid processing industries.

• Carbon Steel, Stainless Steel, Hastelloy and Titanium; ANSI or DIN flange connections
• Full vacuum to 150 PSI; seat materials RPTFE, Metal or Inflatable; spray balls, nozzles or bespoke options

Approved and specialist ranges (ASCO)

• ATEX approved solenoid valves for hazardous or explosive environments, with approvals from UL, CSA, FM, ATEX and IECEx
• Nuclear Qualified range of valves and critical-application solenoid valves, pressure and temperature switches, Hydramotor actuators and complete engineered valve solutions for emergency core cooling, emergency generator, steam generator feed water, containment sampling, auxiliary feed water and liquid radiation waste systems
• WRAS approved solenoid valves for on/off control of hot or cold water, G3/8" to G1", brass body, 0 to 10 bar
• EN161 gas approved valves for gas pilot and gas burner control, type tested to EN 161 and satisfying the European gas appliance directive (2009/142/EC)
• Dust collector systems: pulse valves, remote and solenoid operated replacement pilot valves and complete pilot valve boxes

Actuation

Pneumatic Actuators in compliance with ATEX, PED, SIL and CE Marked in Compliance with EU Directives including the Machinery Directive, with a wide range of torques to suit Quarter Turn Ball, Butterfly, Dampers and Plug Valves.

• Rack and Pinion 7 to 3500 Nm; 4 Piston (Quad) 15 to 2000 Nm; Vane 51 to 2000 Nm; Scotch Yoke 3343 to 300,000 Nm
• Aluminium, Cast/Ductile Iron, Stainless Steel, anti-corrosive coating options; ISO/NAMUR interface
• Electric Actuators for Quarter-turn, Multi-Turn, Linear, Modulating and Fail-Safe applications; single phase 110/220 V and three phase 380 V; safe area and ATEX; Foundation Fieldbus, Profibus, Modbus and DeviceNet