Induchem Group offers a range of ARI Steam Products including ARI-PREsys S & ARI-CORsys St, together with ASCO steam application valves, Y strainers, Steriflow clean steam traps and specialties, the Ace Sanitary washdown station and Clark-Reliance boiler water level equipment. [Heat exchangers appear on Induchem's products menu but have no product page; confirm the range and principal.]

Plant steam

• ARI Steam Products including ARI-PREsys S and ARI-CORsys St, plus ARI STEVI control valves and safety valves for steam service
• ASCO steam application solenoid valves (Series 222) and special purpose valves for hot water and steam
• Y strainers in a wide range of sizes, materials, pressures, end connections and cover configurations (Mueller, ARI), plus suction diffusers and triple duty check valves for pump protection

Clean steam (Steriflow)

Steriflow produce a range of Balanced Port, Thermostatic Steam Traps, specifically designed for use in validated clean steam systems. Their hygienic design follows ASME BPE guidelines, including an internal surface finish of < 0.5µm Ra, self-draining design and all relevant materials, marking and documentation guidelines. The standard trap, the Mk93, provides higher flow rates at low differential pressures and low sub-cooling levels (less than 1.7°C), ensuring that condensate won't back up and wet the upstream validated temperature sensor.

• ASTM A479 316L bar stock; gaskets certified to FDA 21CFR177 and USP Class VI; SF1 internal finish, SF5 electropolish optional; 20mm Tri-Clamp
• Sanitary Sub-Cooled Condenser (SSC) designed to reduce SIP Cycle Time, replacing 300-450mm of drip leg between SIP temperature sensors and sanitary steam traps

Washdown stations (Ace Sanitary)

The Ace Sanitary Washdown Station delivers a high temperature wash down using a proprietary mixing valve that combines steam and water for a constant stream at the operator's set temperature, with an intuitive safety shutoff feature.

Boiler water level equipment (Clark-Reliance)

Induchem Group are an authorized distributor of Clark-Reliance. Boiler (Steam) Drum Applications to 3000 PSI. Clark-Reliance Boiler Trim manufactured since 1884 has the largest install base worldwide: water gauge valves, water columns and gauge glasses designed and manufactured in total compliance with ASME Boiler Code requirements and hydrostatically tested to 150% of design pressure, and the Eye-Hye SmartLevel remote water level indication system with self-diagnostic sensor technology that retrofits an existing Eye-Hye probe column without modification.

Steam trap surveys and steam leak audits supporting ISO 50001 accreditation are listed under Steam / Air Energy Audits.